If you contact a friendly Bentonville roofing contractor in your area, they should be able to help you with some quick and easy DIY roof repair tips. When it comes to roof repair, safety should come first, and the difficulty of the task at hand should never be underestimated. However, in most cases, you’ll find the instructions for simple repairs to be easier to understand than you might think.
Quick Fixes for Common Roofing Problems
The most common quick roofing fixes involve using a saw to cut off broken wood shingles, an angle grinder to remove clay tiles or sharp nails guided along the guide line of damaged slate tiles to take them off before placing your replacement tiles. Tiles with nibs can usually be nailed into place, while the nails and edges of a replacement shingle can be reinforced with a standard sealant.
Patch a flat roof by identifying any holes it may have and preparing the right primer. You will first have to research the type of membrane roofing material that your manufacturer uses and prepare the primer accordingly. After cleaning off any debris from your roof, apply the primer, overlapping it with the damaged area, then adding the correct self-adhesive patching material to cover the holes entirely.
In the case of asphalt shingles, you have to identify the broken shingles, and remove the damaged pieces along with the nails that still held them in place. The new shingles have to be cut to the exact measurements of the old ones, set into place, and fastened securely with the use of roofing nails.
Other Simple Roof Repair and Maintenance Considerations
There are many other simple DIY roof repair tips you can consider. Depending on the type of roof you own, the following ideas should help you at least to a basic extent:
- Wait until the weather is dry and your roof dries up as well. If there are holes, consider covering your roof to prevent rainwater from making its way to your home and damaging your walls. Fixing your roof in the rain is not only extremely difficult, but also quite dangerous.
- Make sure you use the right safety equipment for the job, and don’t underestimate environment-related risks. Even the sturdiest of ladders can slip if the ground below is too wet or slippery, so take the right precautions before climbing up.
- Identify broken tiles or shingles as efficiently as possible. Roof damage isn’t always easy to spot, and you might need to put a great deal of effort into mapping even the smallest corners of your roof. Focus on the areas around the flashing, since that is where most leaks will appear.
- If you own wooden shingles, be mindful about waterproofing. Wood doesn’t break off so easily, but it’s more easily affected by water, and can lead to frequent leaks.
Aside from these tips, remember how long your roof should last. An asphalt shingle roof has a 15-20 year lifespan, while wood shakes should last as long as 30-40 years in a best-case scenario. If your roof starts to show signs of wear and tear after less than 5-10 years, you might need to contact a professional roofer for a complete inspection of the structural integrity of your roof, and to provide you with a few additional DIY roof repair tips you could use.